Miele W1 Washing Machines

This message appears when the washing machine detects too much foam in the drum during a wash cycle. Excessive foam can negatively affect washing performance and rinsing.

The display and control buttons are not lit, indicating the washing machine is not receiving electrical power. This is often a basic power supply issue or an energy-saving feature.

The washing machine is not receiving electrical power, which prevents it from starting any program. The display will not show any information, and the Start/Stop button will not illuminate.

The washing machine is unable to drain water properly. This can be due to a blockage in the drain system or the drain hose being incorrectly positioned.

The washing machine program has been canceled because the incoming water pressure is too low. This message appears on the display, indicating that the program cannot proceed.

The washing machine's display shows a prompt to enter a code before a program can be started. This indicates that the PIN code security feature has been activated.

The washing machine's PIN code feature is active, requiring a code to be entered before operation. This security measure prevents unauthorized use of the appliance.

The washing machine's door could not be closed properly, or the door lock mechanism failed to engage. The program cannot start or continues until the door is secured.

A general internal fault has occurred within the washing machine, causing the program to be canceled. This is a broad error indicating a system malfunction.

Your Miele washing machine may experience sporadic or complete failures to connect to your home WiFi network. This can prevent you from using the Miele@mobile app for remote operation or to check your washing machine's status. This often happens due to interference from other household appliances.

During the Miele@home setup process (either using the Miele app or WPS), the connection attempt was not successful within the allotted time. The display will stop showing the countdown.

The program has been canceled because the water pressure is too low, below 100 kPa (1 bar). This prevents proper operation of the wash cycle.

The washing machine is not receiving enough water, or the water intake is blocked or restricted. This can cause the wash program to be canceled.

The washing machine's internal water protection system has detected a potential leakage or issue, leading to its activation. This is a safety measure to prevent water damage.

This message indicates that the washing machine's internal water protection system has detected a potential leak or overflow, activating a safety shutdown. The machine will stop operating to prevent further water damage.

The indicator light  and the message  on the time display indicate that a wash program using a 'Hot+' temperature has not been run for a long time. This can lead to bacteria and odor buildup inside the washing machine.

The symbol  is lit up on the time display. This means the program selector knob was moved to a different position after the wash program had already started.

This icon appears on the time display when the MobileStart program is selected, indicating that the washing machine is successfully connected to the Miele@home network. It confirms remote operation is possible.

The symbols  and  appear alternately on the time display. This indicates that the washing machine door is not closed properly or the door lock could not engage, preventing the program from starting or continuing.

This alternating message signifies that the SoftSteam extra option, designed to reduce creasing at the end of a program, was unable to be carried out properly.

The fault indicator light ,  and  appear alternately on the time display, and the buzzer sounds. This indicates a problem with the water intake, meaning the washing machine isn't getting enough water or its flow is restricted.

The fault indicator light ,  and  appear alternately on the time display, and the buzzer sounds. This indicates that the water protection system has reacted to a detected issue, often a leak or overflow.

The fault indicator light  lights up,  and  appear alternately on the time display, and the buzzer sounds. This signifies that the drain system is blocked or restricted, preventing proper water drainage.

The symbols  and  alternate on the time display and the buzzer sounds, indicating a general fault within the washing machine's system. This requires a reset of the appliance.

The symbol  lights up on the time display when the MobileStart  program is selected. This indicates that the remote control function for operating the washing machine via the app is currently switched off.

After the appliance is switched on, the symbol  appears in the time display. This indicates that a software update is available for the washing machine, which may include new features or improvements.

This icon lights up on the time display when the MobileStart program is selected, indicating that the Miele@home feature has not been configured. Remote operation via the app is not possible.

This indicator light signals that too much foam has been generated during the washing program. Excessive foam can negatively impact wash performance and rinsing efficiency.