husqvarna Automower 435X AWD
12 fault codes documented
Charging station blocked — Poor contact or obstruction
The mower is having trouble connecting to the charging station. This could be due to dirty charging contacts or an object physically blocking the station. This message appears in the Automower Connect app.
Cutting system blocked — Grass or object wrapped around blade disc
The blade disc is obstructed, preventing the cutting system from rotating. This message appears in the Automower Connect app.
Disturbances from metal objects — Signal strength is too low
Interference from nearby metal objects, buried cables, or improper boundary wire installation is preventing the mower from detecting the loop signal. This message appears in the Automower Connect app.
ECO mode activated — Mower attempted to start outside charging station
The mower was set to ECO mode, which disables signals when charging. It then tried to start when it shouldn't have. This message appears in the Automower Connect app.
Empty battery — Mower cannot find charging station or has no accurate position
The mower's battery is depleted, and it cannot locate its charging station. This can happen with boundary wire or EPOS installations. This message appears in the Automower Connect app.
LED status indicator on or flashes — Mower is not completely OFF
The LED status indicator light on the mower is still active, meaning the mower is not fully powered down. This is a warning before performing maintenance.
No loop signal — Charging station or low-voltage cable not connected
The mower cannot detect the signal from the charging station, which is needed for operation. This message appears in the Automower Connect app.
Slipped — Mower is caught and unable to drive
The mower is caught on something or is on a slope it cannot handle, causing its wheels to spin. This message appears in the Automower Connect app.
Trapped — Mower is stuck in a confined area
The mower cannot move freely because it is blocked by obstacles. This message appears in the Automower Connect app.
Wheel motor blocked — Grass or object wrapped around drive wheel
Something is preventing the drive wheel from turning freely. This message appears in the Automower Connect app.
Wheel motor overloaded — Mower is caught and unable to drive
Similar to 'Slipped', the motor is overloaded because the mower is caught on something or the conditions (like wet grass) are too difficult. This message appears in the Automower Connect app.
Wrong PIN code — Incorrect PIN entered
An incorrect PIN code has been entered too many times. The mower will be blocked for a period. This message appears in the Automower Connect app.