CodeRegistry
Brands
  1. Home
  2. Zanussi
  3. Washing Machines
  4. E59
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

E59

E59 — No signal from tachometric generator for more than 3 seconds

Zanussi · Washing Machines

What does E59 mean?

The Washing Machine has not received a signal from the tachometric generator for over 3 seconds. The cycle stops and the door locks.

Common Causes

  • A defective motor.
  • Defective wiring on the inverter for the motor.
  • A faulty inverter board.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Turn the program selector to '0' or OFF to reset the appliance.

  2. 2

    Unplug the Washing Machine from the power outlet and wait for at least 30 seconds.

  3. 3

    Plug the machine back in and attempt to start a new cycle.

  4. 4

    If the error persists, contact an authorized service technician for a professional inspection of the motor and inverter system.

Browse all codes in this manual (66)
Verified technical data. Last updated: April 2026

Related Faults

E00E00 — No alarmE11Error E11 — Difficulties in water fill for washing, indicated by 1 red flash and 1 green flash on the START/PAUSE LEDE12Error E12 — Difficulties in water fill for drying, indicated by 1 red flash and 2 green flashes on the START/PAUSE LED
Source: Zanussi Washing Machines
Open Manual (Page 28)Search more codes in this manual