Hoover Washing Machines
30 fault codes documented
Any other code or flashing LEDs - General unspecified error
If the Washing Machine displays an error code other than E2, E3, E4, or E7, or shows an unlisted LED flash pattern, it indicates a general internal issue.
Appliance fails to operate - Machine won't start
The Washing Machine does not start when you try to begin a wash cycle.
Appliance is draining while being filled - Continuous water drainage
The Washing Machine drains water out immediately while it is trying to fill, preventing a proper wash cycle.
Appliance will not be filled with water - No water supply detected
The Washing Machine is unable to fill with water when attempting to start a cycle.
CHILD LOCK OFF - Child lock deactivated
The display shows 'CHILD LOCK OFF', indicating that the child lock function is not active and the control panel can be used normally.
CHILD LOCK ON - Child lock activated
The display shows 'CHILD LOCK ON', indicating that the child lock function is currently active. This prevents changes to programs or accidental starts.
CLR FLTR - Drainage error, clean pump filter
This message indicates a drainage problem where water is not fully drained within 6 minutes, suggesting the pump filter is dirty.
Drainage failure - Water remains in the drum
The Washing Machine fails to drain water at the end of a cycle or when a drain is expected.
E2 - Lock error
The Washing Machine door is not properly locked, preventing the cycle from starting or continuing.
E3 or 3 LED flashes - Washing Machine does not drain water
The Washing Machine is unable to successfully drain water from the drum. This usually points to an obstruction or issue with the drainage system. For models without a display, this is shown by 3 flashes of the LEDs followed by a 5-second pause, repeating.
E4 - Water level not reached / Drain hose self-syphoning
The Washing Machine did not reach the required water level after 12 minutes, or the drain hose is causing water to continuously drain out.
E5 - Drainage error (Water not fully drained)
The Washing Machine has failed to drain all the water within the expected time frame.
E7 or 7 LED flashes - Door problem
The Washing Machine's door is not properly closed or there's an issue with the door lock mechanism. For models without a display, this is shown by 7 flashes of the LEDs followed by a 5-second pause, repeating.
E8 - Water protective level error
This error code signifies an issue related to the Washing Machine's protective water level system, potentially indicating an overfill or incorrect water level detection.
F3 - Temperature sensor error
The appliance has detected an issue with the temperature sensor, which helps regulate the water temperature during the wash cycle.
F4 - Heating error
This error indicates a problem with the Washing Machine's heating system, meaning the water may not be reaching the correct temperature.
F7 - Motor error
The Washing Machine has detected an issue with its motor, which powers the drum's rotation.
FA - Water level sensor error
This code indicates a problem with the water level sensor, which measures how much water is in the drum.
FC0, FC1 or FC2 - Abnormal communication error
These codes indicate a general communication problem within the Washing Machine's internal systems.
FH - IoT module configuration failure
The Internet of Things (IoT) module, which handles smart features and connectivity, has failed to configure correctly.
LOCK - Door locked due to safety conditions
The display shows 'LOCK', indicating that the door is currently locked for safety reasons, such as high water level, high water temperature, or during the spinning cycle.
Washing Machine does not spin or completes the spin cycle
The Washing Machine fails to perform a spin cycle, or the spin cycle is interrupted, reduced, or aborted. This is often due to an unbalanced load or drainage issues.
Washing Machine does not work or start a program
The Washing Machine fails to power on or begin a selected wash program despite user input.
Operation stops before completing wash cycle - Program ends prematurely
The Washing Machine stops operating before the wash cycle is fully completed.
Option indicator light goes off - Selected option is incompatible
When selecting an option, its indicator light turns off, indicating that the chosen option is not compatible with the currently selected wash program.
SOUND OFF - Buzzer deactivated
The display shows 'SOUND OFF', meaning the acoustic signal (buzzer) for alerts and button presses has been turned off.
SOUND ON - Buzzer activated
The display shows 'SOUND ON', meaning the acoustic signal (buzzer) for alerts and button presses has been turned on.
Strong vibration while spinning - Excessive shaking during spin cycle
The Washing Machine vibrates excessively and makes loud noises during the spin cycle.
Strong vibrations or loud noises are heard during the spin cycle
The Washing Machine experiences excessive shaking, strong vibrations, or produces loud noises specifically during the spin cycle, indicating an installation or loading issue.
Water leaked on the floor near the Washing Machine
Water is observed leaking onto the floor in the vicinity of the Washing Machine, indicating a potential connection or filter issue.