Display shows 'Outside working area! Press START to reset' — Landroid cannot find boundary wire signal

What does Outside working area! Press START to reset mean?

This message appears if the Landroid is outside its designated mowing area or cannot detect the boundary wire signal. The LED on the charging base may be red.

• The Landroid is actually positioned outside its working area.
• The boundary wire signal is interrupted or not detected.
• The boundary wire ends are connected incorrectly to the charging base.

Click steps to track your progress.

1. 1

   If the Landroid is outside its working area, move it back inside and press START.

2. 2

   If the Landroid is inside its working area, check the charging base LED: if red, ensure the boundary wire is correctly connected and the base has power.

3. 3

   If connections are good, try reversing the boundary wire ends at the charging base.