CodeRegistry
Brands
  1. Home
  2. Schneider Electric
  3. EVlink Smart Wallbox Charging Stations Troubleshooting
  4. EVlink City — Long beep and green lights blink
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

EVlink City — Long beep and green lights blink

EVlink City — Long beep and green lights blink — Restarting after reset

Schneider Electric · EVlink Smart Wallbox Charging Stations Troubleshooting

What does EVlink City — Long beep and green lights blink mean?

The charging station is emitting a long beep and its green indicator lights are blinking. This occurs after a reset procedure and indicates the station is restarting.

Common Causes

  • Completion of a factory reset procedure.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Close the door.

  2. 2

    Wait for the charging station to restart, which takes about a minute.

  3. 3

    If at step 3 of the reset procedure all right-hand indicator lights were off, close the door and restart the procedure.

  4. 4

    If only the right-hand green indicator light blinked at step 4, perform the reset procedure on the left side, then the right.

Browse all codes in this manual (31)
Verified technical data. Last updated: April 2026

Related Faults

1 blink1 blink — Surge arrestor fault10 blinks10 blinks — Configuration file error2 blinks2 blinks — Trap not locked fault
Source: EVlink Smart Wallbox Charging Stations Troubleshooting
Open Manual (Page 23)Search more codes in this manual