Samsung Washing Machines
13 fault codes documented
Cool LED flashes - Water level sensor issue or unsuccessful fill
The Cool LED flashes, indicating either the water level sensor is not working properly or the washer has attempted to fill but was unsuccessful. The washer will drain for 3 minutes during this time.
Eco Warm LED flashes - Button not working
The Eco Warm LED flashes, indicating that a button on the control panel is not functioning correctly. This may prevent you from selecting or operating certain features.
Extra High LED flashes - Unsuccessful fill
The Extra High LED flashes, indicating that the washer has tried to fill with water but was unsuccessful. The washer will drain for 3 minutes during this time, and the POWER button will be inoperative.
High LED flashes - Washer not reaching proper water level
The High LED flashes, indicating that the washer has attempted to fill but has not reached the proper water level. The washer will drain for 3 minutes, and the POWER button will be inoperative.
Hot & Cool LEDs flash - Mems sensor not working
The Hot and Cool LEDs flash together, indicating that the Mems sensor is not working properly. This sensor is crucial for the washer's operation.
Hot & Extra High LEDs flash - Door lock not working
The Hot and Extra High LEDs flash together, indicating that the door lock mechanism is not working properly. This prevents the washer from operating safely.
Hot & High LEDs flash - Door lock not working
The Hot and High LEDs flash together, indicating that the door lock mechanism is not working properly. This prevents the washer from operating safely.
Hot & Low LEDs flash - Supplied water temperature too high
The Hot and Low LEDs flash together, indicating that the temperature of the supplied water is too high. Check the water connections to ensure correct taps are used.
Hot & Warm LEDs flash - Unbalanced load
The Hot and Warm LEDs flash simultaneously, indicating that an unbalanced load has prevented the washer from spinning. The load needs to be redistributed.
Hot LED flashes - Lid is open when washer is running
The Hot LED indicator flashes, signaling that the washer lid is open while the machine is in operation. This is a safety feature to prevent operation with an open door.
Low LED flashes - Washer not draining or clogged drain
The Low LED flashes, indicating that the washer is not draining. This can also occur if the unit senses a small clog in the drain system.
Mid LED flashes - Water level sensor fault
The Mid LED flashes, indicating a fault detected in the water level sensor. This prevents the washer from correctly measuring the water level.
Warm LED flashes - Communication error
The Warm LED indicator flashes, indicating a communication error between the main control boards (SUB PBA and MAIN PBA). This prevents the washer from operating correctly.