F32 -10 — Compressor speed mismatch

What does F32 -10 mean?

The compressor speed is not matching the signals being sent from the control board. This could be due to a faulty IPM transistor module or a jammed compressor.

• The IPM transistor module is malfunctioning.
• The compressor is mechanically jammed.
• Incorrect control signals being sent to the compressor.

Click steps to track your progress.

1. 1

   Listen for any unusual sounds from the compressor.

2. 2

   Check the IPM transistor module and its wiring.

3. 3

   Ensure the compressor is not seized or obstructed.

4. 4

   Turn off the unit, unplug it, wait 30 seconds, and plug it back in to reset.