Rinse LED lit - Flood switch activated (Fisher & Paykel Dishdrawers badge type)

What does Rinse LED mean?

The Rinse LED is lit on the badge panel, indicating the flood switch has been activated due to potential water leakage or overfill.

• Water leakage detected
• Overfill condition due to faulty inlet valve
• Blocked drain system causing water to back up

Click steps to track your progress.

1. 1

   Turn off the dishwasher's power supply immediately at the wall socket or circuit breaker.

2. 2

   Check for any visible water leaks around and underneath the appliance.

3. 3

   Carefully remove any standing water from the base of the dishwasher.

4. 4

   If no leak is found, reset the appliance by disconnecting power for 10 seconds, then reconnect and try again.