CodeRegistry
Brands
  1. Home
  2. Miele
  3. Professional Troubleshooting Guide
  4. C1
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

C1

C1 - Oven temperature too high (over 305°C) (Fisher & Paykel Wall ovens)

Miele · Professional Troubleshooting Guide

What does C1 mean?

The oven has detected that its internal temperature has exceeded 305 degrees Celsius, indicating an overheating condition.

Common Causes

  • Faulty oven temperature sensor
  • Stuck heating element relay causing continuous heating
  • Control board malfunction leading to incorrect temperature regulation

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Turn off the oven's power supply immediately at the circuit breaker.

  2. 2

    Allow the oven to cool down completely, leaving the door slightly ajar if safe to do so.

  3. 3

    Once cool, restore power and check if the error clears.

  4. 4

    Avoid using the oven until the issue is resolved to prevent potential damage or fire hazard.

Browse all codes in this manual (45)
Verified technical data. Last updated: April 2026

Related Faults

A1A1 - CCU did not reset (Fisher & Paykel Wall ovens)Delicate LEDDelicate LED lit - Motor not rotating (Fisher & Paykel Dishdrawers badge type)Delicate and Rinse LEDDelicate and Rinse LEDs lit - Water temperature too high (over 85°C) (Fisher & Paykel Dishdrawers badge type)
Source: Miele Professional Troubleshooting Guide
Open Manual (Page 71)Search more codes in this manual