Miele Dishwashers
8 fault codes documented
0:00 in display — Programme has ended
The display shows '0:00' indicating that the selected programme has successfully ended. Buzzers may also sound if activated, and the door might open slightly if AutoOpen is active.
Alarm tone and '---' in display — Technical fault
The alarm tone sounds and three dashes appear in the time display, indicating a general technical fault. This happens if indicator lights flash again after a restart attempt.
F10 — Waterproof system reacted or drain pump issue
The alarm tone is sounding, and 'F10' appears in the display. This indicates that the Waterproof system has been activated, possibly due to a drain pump still running with the door open.
F14 — Water drainage fault with alarm and flashing light
The dishwasher stops during a programme, an alarm tone sounds, and the water inlet/drainage indicator light flashes. 'F14' appears in the time display. There might be water left in the wash cabinet.
F18 — Technical fault during programme
The dishwasher stops during a program, and 'F18' appears in the time display. This indicates a general technical fault has occurred.
F33 — Door does not open automatically or door locking pin issue
The alarm tone is sounding and 'F33' appears in the time display. The door may not open automatically, or the door locking pins might not retract after the door is opened.
F78 — Circulation pump fault
The alarm tone is sounding, and 'F78' appears in the time display. All programme selection indicator lights flash when the door is open, signaling a fault with the circulation pump.
1. and 2.5.0 alternately or F12/F13 and flashing light — Water inlet fault
The dishwasher stops shortly after starting or during a program, an alarm tone sounds, and the water inlet/drainage indicator light flashes. The display shows '1.' and '2.5.0' alternately, or 'F12' or 'F13'. This indicates an issue with the water inlet.