Makita Power Tool
19 fault codes documented
Abnormal vibration - Drive system issue
Abnormal vibration can occur if the drive system is not working correctly.
Main power lamp blinks green when pulling switch lever - Lock key not inserted
The main power lamp blinks green when the switch lever is pulled if the lock key is not inserted.
Battery indicator blinking red - Battery malfunctioned
If the battery indicator blinks red, it may indicate a battery malfunction.
Mower blade does not rotate - Check for jammed object or drive system
The mower blade may not rotate if an object is jammed or the drive system is faulty.
Mower blade does not rotate - Drive system issue
The mower blade may not rotate if the drive system is not working correctly.
Blade coasts after switch release - Safety warning
The blade coasts for a few seconds after releasing the switch. Do not start any operation until the blade comes to a complete stop.
Machine fails to quickly stop blades - Electric brake issue
If the machine consistently fails to quickly stop the mower blades after releasing the switch lever, there may be an issue with the electric brake.
Grass level indicator stops oscillating - Grass basket is almost full
When the grass basket is almost full, the indicator stops oscillating while the blades are running. This can cause motor strain.
Motor does not reach maximum RPM - Check battery, drive system
The motor may not reach maximum RPM due to battery issues or drive system problems.
Motor does not reach maximum RPM - Drive system issue
The motor may not reach maximum RPM if the drive system is not working correctly.
Motor stops running after a little use - Check battery, cutting height, grass clog
The motor may stop after a short use due to low battery, low cutting height, or grass clogging.
Motor stops running after a little use - Battery installed improperly
The motor may stop if the battery cartridge is not installed correctly.
Warning: Do not pour water in specific area - Motor unit may malfunction
Pouring water into the motor unit area can cause a malfunction of the machine.
Mower does not start - Check battery and lock key
The mower will not start if there are issues with the batteries, lock key, or battery selection switch.
Mower does not start - Battery selection switch incorrect
The mower will not start if the battery selection switch is not set correctly.
Red main power lamp blinking - Overdischarge protection active
The main power lamp blinks red when the battery capacity is low. This indicates overdischarge protection has activated.
Red main power lamp illuminated - Overheat protection active
The main power lamp lights up red when the machine or battery is overheated. This indicates overheat protection has activated.
Green main power lamp blinking - Overload protection active
The main power lamp blinks green when the machine draws too much current. This indicates overload protection has activated.
Abnormal vibration - Check blade
Abnormal vibration can occur if the blade is imbalanced or excessively worn.