Uneven mowing results — Mower not performing optimally, grass length inconsistent

¿Qué significa Uneven mowing results ?

This symptom describes an issue where the grass is not being cut evenly across the working area. It can be due to insufficient working hours, a large area, dull blades, or incorrect settings.

• Automower works too few hours per day.
• Working area is too large for the set operating time.
• Blades are dull or damaged.
• Long grass in relation to the set cutting height.
• Mower's various starting areas are not being used correctly.
• Accumulation of grass by the blade disc or around the motor shaft.

Haga clic en los pasos para seguir su progreso.

1. 1

   Increase the daily working hours of the Automower.

2. 2

   If the working area is large, consider limiting it or further extending the working time.

3. 3

   Replace all blade units to ensure balanced rotation and sharp cutting.

4. 4

   If grass is long, increase the cutting height, then gradually lower it over time.

5. 5

   Verify and adjust the mower's starting areas under Installation - Follow loop - Follow loop out.

6. 6

   Dismantle and clean the skid plate and blade disc to remove grass and foreign objects.