CodeRegistry
Marcas
  1. Inicio
  2. husqvarna
  3. Automower Technical Manual
  4. Both the mowing and charging times are shorter than usual
About·Privacy·Terms

CodeRegistry — Tu biblioteca global de soluciones técnicas.

Por su seguridad, siga siempre los manuales oficiales del fabricante. CodeRegistry es un sitio independiente y no está afiliado a las marcas citadas.

Both the mowing and charging times are shorter than usual

Both the mowing and charging times are shorter than usual — High temperatures or low battery capacity

husqvarna · Automower Technical Manual

¿Qué significa Both the mowing and charging times are shorter than usual ?

This behavior indicates that both the mowing duration and the time spent charging are reduced. This can be normal in high ambient temperatures, but can also signal a problem with the battery's capacity.

Causas comunes

  • High temperatures (gradually increasing above 25 °C).
  • Low battery capacity due to an aging or defective battery.

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

  1. 1

    Note if the ambient temperature is significantly high (above 25 °C), as this can reduce operating times.

  2. 2

    Perform a battery test to determine the battery's current capacity.

  3. 3

    If the battery capacity is low, consider replacing the battery (see page 96).

  4. 4

    Ensure the mower is operating in its intended conditions, avoiding extreme heat if possible.

  5. 5

    Monitor the mower's performance over several cycles to confirm if it's a persistent issue.

Ver todos los códigos en este manual (37)
Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

Automower runs at an angle or in an arcAutomower runs at an angle or in an arc — Tilt sensor calibration or defectBlade motor defectBlade motor defect or Blade disc blocked — Blades cannot rotate freelyBoundary wire sawtooth patternBoundary wire sawtooth pattern — Mower struggles to follow boundary wire
Fuente: Husqvarna Automower Technical Manual
Open Manual (Page 109)Buscar más códigos en este manual