SU dS on LED display – Oversudsing detected

What does SU dS mean?

The washer has detected too much suds. The LED will display "SU" followed by "dS" and then "0 min" for 60 seconds, repeating until the suds are cleared. The washer will perform additional rinses, extending the cycle duration.

• Using too much detergent
• Not using a High-Efficiency (HE) detergent suitable for your washer

Click steps to track your progress.

1. 1

   Allow the washer to complete any additional rinse cycles it performs to clear the suds.

2. 2

   If necessary, run an additional rinse cycle to ensure all suds are removed.

3. 3

   In future loads, always use a low-sudsing, high-efficiency (HE) detergent.

4. 4

   Reduce the amount of detergent used, especially with soft water or smaller loads.