"CHECK WATER" or E2 displayed with audio signal — Dishwasher does not fill

What does E2 / CHECK WATER mean?

The Dishwasher is not filling with water, indicated by a message on the display or error code E2 along with a short audio signal.

• Water supply tap is closed
• Water supply hose is bent or crushed
• Drain pipe is at an incorrect height (see installation section)
• "Sand" filter is clogged

Click steps to track your progress.

1. 1

   Ensure the water supply tap is fully open.

2. 2

   Check that the water supply hose is not bent, trapped, or crushed.

3. 3

   Verify the drain pipe is at the correct height as shown in the installation guide.

4. 4

   Close the water supply tap, then unscrew the drain pipe from the back of the Dishwasher and inspect the "sand" filter for blockages, cleaning if necessary.

5. 5

   Turn off the Dishwasher, then restart the selected program.