Candy Dishwashers
10 fault codes documented
Program indicator light blinking rapidly with intermittent audio signal — General program fault
During a program, an indicator light on the control panel blinks rapidly and an intermittent audio signal sounds, indicating a general malfunction or fault. This occurs on models without a display.
"CHECK WATER" or E2 displayed with audio signal — Dishwasher does not fill
The Dishwasher is not filling with water, indicated by a message on the display or error code E2 along with a short audio signal.
E3 displayed with audio signal — Dishwasher does not drain water
The Dishwasher is unable to drain water, indicated by error code E3 on the display along with a short audio signal.
E4 displayed with audio signal — Water leak detected
The Dishwasher has detected a water leak, indicated by error code E4 on the display along with a short audio signal.
E4, E6, E7, Ef, or EL displayed with audio signal — Electronic control fault
The Dishwasher's electronic control system has detected an internal fault, indicated by one of these error codes on the display along with a short audio signal.
E8 or Ei displayed with audio signal — Water heating or filter plate issue
The Dishwasher is experiencing a problem with the water heating element or a clogged filter plate, indicated by error code E8 or Ei on the display along with a short audio signal.
Intermittent audio signal when opening door during drying cycle — Drying cycle not finished
If you open the Dishwasher door while the drying cycle is in progress, an intermittent audio signal will sound. This is an advisory signal indicating that the drying cycle has not yet completed.
"NO SALT" indicator light on or whitish stains on dishes — Salt container needs refilling
The "NO SALT" indicator light on the control panel is illuminated, or you notice whitish stains on your dishes, signalling that the salt container needs to be topped up.
Option indicator light flashes then goes off — Incompatible option selected
If you select an option that is not compatible with the chosen wash program, its indicator light will briefly flash and then turn off, indicating the option cannot be used with the current program.
Pressing "RESET" for "NO SALT" indicator without filling container — Interferes with salt indicator function
Resetting the "NO SALT" indicator light without actually refilling the salt container will cause the indicator light to malfunction and not correctly signal low salt levels in the future.