‘Outside working area! Press START to reset’ — Boundary wire connection issue

What does Your Landroid is inside its working area and the boundary wire is connected, but the display says ‘Outside working area! Press START to reset’ mean?

The Landroid displays 'Outside working area!' even though it is inside the working area and the boundary wire is connected. This often means the boundary wire ends are connected incorrectly.

• Boundary wire ends are clamped incorrectly at the charging station.
• Boundary wire connections are reversed.

Click steps to track your progress.

1. 1

   Reverse the boundary wire ends and reconnect them to the charging station.

2. 2

   Ensure a secure connection at the charging station terminals.

3. 3

   Check the boundary wire for any breaks or damage.

4. 4

   If the issue persists, consult the installation guide or contact support.