Landroid stops in the working area. — Obstacle present or cutting settings too low

What does Landroid stops in the working area. mean?

The Landroid has stopped working within its designated area. This could be because there is an obstacle in its path or the cutting height is set too low for the grass conditions.

• An unexpected obstacle is blocking the Landroid's path.
• The cutting height is set too low for the current grass length or density.
• Boundary wire signal issues causing it to stop prematurely.

Click steps to track your progress.

1. 1

   Remove any obstacles from the Landroid's working area.

2. 2

   If the grass is long or dense, raise the cutting height setting on the Landroid.

3. 3

   Gradually lower the cutting height again after the initial mowing pass if needed.

4. 4

   Check the boundary wire for signal strength and continuity.