Wire missing! — Boundary wire signal not detected

What does Wire missing! Press START to reset mean?

The Landroid cannot detect the signal from the boundary wire. This could be due to a loose connection or a break in the wire.

• The boundary wire is not properly connected to the charging station.
• There is a break or cut in the boundary wire.
• The boundary wire signal is too weak.

Click steps to track your progress.

1. 1

   Check that the boundary wire is securely connected to the wire terminal clamps on the charging station.

2. 2

   Inspect the entire length of the boundary wire for any breaks or cuts and repair if necessary.

3. 3

   Ensure the boundary wire is within the maximum recommended length (984 ft.).

4. 4

   If the LED on the charging station is red, this often indicates a boundary wire issue.