Won't fill - No water or low pressure

What does won't fill mean?

The washer is not filling with water, or the water level is too low. Check water supply, filters, hoses, and the water level sensor.

• No water supplied to washer or low water pressure
• Plugged filter/screen or air trap
• Drain hose installation issue causing siphoning
• Valve problem
• Water level sensor problem

Click steps to track your progress.

1. 1

   Check water connections to the washer.

2. 2

   Verify hot and cold water supply is turned on.

3. 3

   Check for plugged filters or screens in the water valve or hoses.

4. 4

   Remove the air trap and check for lint or material.

5. 5

   Check for proper drain hose installation to ensure water is not siphoning out.

6. 6

   Check the water inlet valves (Refer to TEST #6, page 16).