CodeRegistry
Brands
  1. Home
  2. Tesla Wall Connector
  3. (Gen 3)
  4. Green pulsing
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

Green pulsing

Pulsing green LED — Ready to commission or SSID broadcasting

Tesla Wall Connector · (Gen 3)

What does Green pulsing mean?

A pulsing green LED indicates that the Wall Connector is broadcasting its network (SSID) and is ready to be commissioned or set up.

Common Causes

  • Initial setup after installation.
  • Wall Connector needs to be connected to Wi-Fi.
  • Network settings require configuration.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Open the Tesla app on your mobile device.

  2. 2

    Follow the on-screen instructions to commission the Wall Connector.

  3. 3

    Ensure your mobile device is connected to the Wall Connector's temporary Wi-Fi network during setup.

Browse all codes in this manual (49)
Verified technical data. Last updated: April 2026

Related Faults

1 red blinkOne red blink — Ground fault detected, charging disabled2 red blinksTwo red blinks — Ground assurance fault, high ground resistance detected3 red blinksThree red blinks — High temperature detected, charging limited or disabled
Source: Tesla Wall Connector (Gen 3)
Open Manual (Page 54)Search more codes in this manual