CodeRegistry
Brands
  1. Home
  2. SMA
  3. Sunny Boy Series
  4. Derating
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

Derating

Derating - Inverter reducing power due to high internal temperature

SMA · Sunny Boy Series

What does Derating mean?

The SMA Sunny Boy is reducing its output power because its internal temperature is too high. This is a warning, indicating that the inverter is managing its temperature to prevent damage.

Common Causes

  • High internal temperature
  • High ambient temperature
  • Blocked fan intakes
  • Dirty fans.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Inspect the fan intakes and the general area around the Sunny Boy inverter for any blockages or poor ventilation.

  2. 2

    Clean the fan intakes if they are dirty or obstructed.

  3. 3

    Ensure the inverter is installed in a location with adequate airflow and within its specified operating temperature range.

  4. 4

    Allow the inverter to cool down if the ambient temperature is very high.

Browse all codes in this manual (30)
Verified technical data. Last updated: April 2026

Related Faults

Bfr-SrrBfr-Srr - Communication failure between micro-controllersEEPROMEEPROM - Data read/write failure (non-critical)EEPROM pEEPROM p - Defective data EEPROM, device permanently disabled
Source: SMA Sunny Boy Series
Open Manual (Page 87)Search more codes in this manual