CodeRegistry
Brands
  1. Home
  2. Siemens
  3. IQ-400 Access Control Systems
  4. E5
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

E5

E5 – Packet queuing error

Siemens · IQ-400 Access Control Systems

What does E5 mean?

The Siemens IQ-400 panel has encountered an error related to packet queuing, indicating a general failure within the system. This can affect how data packets are processed.

Common Causes

  • Internal IQ-400 system failure.
  • High communication traffic or network overload affecting packet processing.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Remove the battery from the IQ-400 for 5 minutes, then reinsert it and restart the panel.

  2. 2

    Check the network activity connected to the IQ-400 and reduce any potential overload if applicable.

  3. 3

    If the error persists, contact your PCSC representative for service.

Browse all codes in this manual (21)
Verified technical data. Last updated: April 2026

Related Faults

Door Sense LED Blinks 1 time every 2 secondsDoor Sense LED Blinks once every 2 seconds – Fault: Open circuitDoor Sense LED Blinks 1 time/secondDoor Sense LED Blinks 1 time/second – Fault: Short circuitDoor Sense LED Blinks 4 times/secondDoor Sense LED Blinks 4 times/second – Circuit NOT calibrated
Source: Siemens IQ-400 Access Control Systems
Open Manual (Page 82)Search more codes in this manual