AIR PURIFYING lamp flashes and POWER lamp is lit — MXZ type multi-system operation mode conflict

What does AIR PURIFYING lamp flash, POWER lamp lighted (MXZ type) mean?

In an MXZ type multi-system, the outdoor unit operates but the indoor unit does not. This occurs when indoor units are set to different operation modes (e.g., COOL/DRY/FAN vs. HEAT). The unit that started first has priority.

• Conflicting operation modes selected across multiple indoor units in an MXZ multi-system.

Click steps to track your progress.

1. 1

   Unify the operation mode across all indoor units (e.g., all set to COOL or all set to HEAT).

2. 2

   Check the remote controller settings for each indoor unit.

3. 3

   Turn off power to all indoor units, then turn them back on and set to a unified mode.

4. 4

   If the problem persists, reset the system by briefly disconnecting power to the outdoor unit.

5. 5

   Refer to the outdoor unit service manual for MXZ type specific multi-system operation details.