CodeRegistry
Brands
  1. Home
  2. Mitsubishi Electric
  3. Air Conditioners
  4. Indoor unit 14-time blink / Outdoor unit 14-time blink
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

Indoor unit 14-time blink / Outdoor unit 14-time blink

Indoor unit 14-time blink, Outdoor unit 14-time blink — Stop valve detected closed (Recall Function)

Mitsubishi Electric · Air Conditioners

What does Indoor unit 14-time blink / Outdoor unit 14-time blink mean?

The indoor unit's upper lamp blinks 14 times and the outdoor P.C. board LED blinks 14 times. This indicates that a closed stop valve has been detected based on the compressor current.

Common Causes

  • Stop valve is closed or obstructed
  • Incorrect compressor current reading

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Turn off the power to the air conditioner at the circuit breaker.

  2. 2

    Visually inspect the stop valve on the outdoor unit to ensure it is fully open.

  3. 3

    Restore power. If the stop valve is confirmed open and the error persists, contact a qualified technician for further diagnosis.

Browse all codes in this manual (40)
Verified technical data. Last updated: April 2026

Related Faults

1-time blink (recall mode)Outdoor Unit Recall: 1-time blink - Indoor/outdoor communication, receiving error1-time blink 2.5 seconds OFF (Outdoor unit operates)1-time blink 2.5 seconds OFF — Frequency drop by current protection (Outdoor unit operates)1-time blink every 2.5 seconds1-time blink every 2.5 seconds — Outdoor unit overcurrent protection
Source: Mitsubishi Electric Air Conditioners
Open Manual (Page 46)Search more codes in this manual