Milwaukee M12 FUEL Drills
8 fault codes documented
1 fuel gauge light flashes 4 times - Battery low charge
The fuel gauge on the tool indicates that the battery pack has less than 10% of its charge remaining. The tool is still operational but will soon need recharging.
1 fuel gauge light flashes 8 times - Battery completely discharged
The tool will not run because the battery pack is completely depleted of charge. This signal indicates the end of the battery's operational capacity and requires immediate charging.
Damaged or entangled cord - Risk of electric shock
The power cord is damaged, frayed, or entangled, which increases the risk of electric shock, fire, or serious injury.
Fuel gauge lights flash - Battery too hot
The battery pack has reached an excessive temperature, causing the tool to stop running as a protective measure. The flashing lights indicate an overheat condition.
Switch does not turn tool on and off
The power tool's switch is not controlling the tool's operation correctly, meaning it cannot be reliably turned on or off.
Misalignment or binding of moving parts, breakage of parts, or other operational issues
The tool exhibits signs of physical damage or internal problems, such as moving parts that are not aligned, broken components, or any other condition that affects its normal operation.
Tool does not start or operate at full power with fully charged battery
The power tool is not functioning as expected, even when a fully charged battery pack is inserted, indicating a potential issue with the tool's contacts or internal components.
Unintentional starting of the power tool
The power tool starts unexpectedly when connected to power or picked up, posing a risk of injury.