Display shows "Water intake See " — Water supply issue

What does Water intake error mean?

The display indicates a problem with the water intake, meaning the Washing Machine is not receiving enough water or no water at all. This can be due to issues with the water supply line or internal filters.

• The water inlet is blocked or restricted.
• The stopcock (water tap) for the Washing Machine has not been properly opened.
• The inlet hose is kinked or bent, preventing water flow.
• There is insufficient water pressure from the household supply.
• The filter in the water inlet is blocked with sediment.

Click steps to track your progress.

1. 1

   Check if the stopcock for the Washing Machine's water supply is fully open.

2. 2

   Examine the inlet hose for any kinks or bends and straighten them if found.

3. 3

   Ensure there is sufficient water pressure by checking other taps in your home.

4. 4

   Clean the filter located in the water inlet according to the manual's instructions.

5. 5

   Wait for the drain pump to stop (approx. 2 minutes) before switching the machine off and then on again.