Leaks, odd noises, or fault indicators present after initial test run

What does Post-Test Run Issues mean?

After running the dishwasher's "Rinse & Hold" program, the appliance is exhibiting leaks, unusual noises, or flashing/lit fault indicators on the control panel. These symptoms suggest a problem with installation or the unit itself.

• Loose plumbing connections.
• Obstruction within the unit.
• Incorrect installation.

Click steps to track your progress.

1. 1

   Inspect all plumbing connections (water inlet, drain) for leaks. Tighten any loose connections.

2. 2

   Listen for the source of odd noises; check for obstructions in the wash cabinet.

3. 3

   Refer to the main operating instructions or "Frequently asked questions" section for specific fault indicator meanings.

4. 4

   If issues persist, contact Miele Technical Service for assistance.