Fault F10 or F11 — Problem with water intake

What does F10 mean?

When the dishwasher stops during a program and displays F10 or F11, it indicates a problem with the water intake. The Intake/Drain indicator will also flash.

• Water supply is not turned on fully.
• Water intake filter is clogged.
• Low water pressure at the intake (below 4.35 psi).

Click steps to track your progress.

1. 1

   Turn the dishwasher off using the On/Off button.

2. 2

   Turn on the water supply fully and restart the program.

3. 3

   Clean the water intake filter (refer to the 'Frequently asked questions' section in the manual).

4. 4

   If the fault persists, contact a plumber to check the water pressure.