Fault code F10 or F11 — Water intake problem

What does Error F10 or F11 mean?

The Intake/Drain indicator flashes and fault code F10 or F11 appears in the display, indicating a problem with the water intake.

• The water supply is not fully open.
• The water intake filter is dirty.
• The flow pressure at the connection point is lower than 7.25 psi.

Click steps to track your progress.

1. 1

   Turn off the dishwasher with the On/Off button.

2. 2

   Ensure the water supply is fully turned on and then restart the program.

3. 3

   Clean the water intake filter as described in the 'Frequently asked questions' section.

4. 4

   If the fault persists, contact a plumber to check the water flow pressure.