Long drain error (implied) - Drain system obstruction or sensor issue

What does Long drain error (implied) mean?

This error occurs if the washer takes too long to drain. Common causes include drain hose issues, siphon effects, or problems with the water level sensor system.

• Drain hose inserted too far into the standpipe
• Drain hose kinked or obstructed
• Pinhole air leak in the pressure switch hose
• Obstructed drain pump
• Faulty water level sensor (pressure sensor)

Click steps to track your progress.

1. 1

   Ensure the end of the drain hose is no more than 4.5 inches down into the standpipe.

2. 2

   Check the drain hose for kinks, twists, or visible obstructions.

3. 3

   Inspect the pressure switch hose for pinhole leaks, kinks, or obstructions.

4. 4

   Clear any visible obstructions from the drain pump.

5. 5

   After fixing the issue, perform a calibration and test the washer.