Machine does not start the start motor when the key is switched on

What does Machine does not start start motor mean?

When you turn the key to the 'ON' position, the engine's starter motor does not engage. This could be due to safety features like the PTO or parking brake, or issues with the battery or electrical components.

• PTO (Power Take-Off) is enabled.
• Parking brake is not activated.
• Low battery voltage or dead battery.
• Blown fuse (20A wired fuse).
• Loose battery terminals.
• Faulty starter relay.
• Faulty P-brake microswitch.
• Faulty PTO button.
• Wiring fault.
• Faulty key switch.
• Faulty control card.

Click steps to track your progress.

1. 1

   Check that the PTO (Power Take-Off) switch is deactivated.

2. 2

   Ensure the parking brake is fully activated.

3. 3

   Verify the 20A wired fuse is intact and replace if blown.

4. 4

   Measure the battery voltage; if it's below 12.0V, charge the battery.

5. 5

   Tighten the screw terminals securely on the battery terminals.

6. 6

   If the starter relay doesn't click when the key is turned to 'Start', replace the relay.