CodeRegistry
Brands
  1. Home
  2. husqvarna
  3. Automower Technical Manual
  4. The Automower works at the wrong time
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

The Automower works at the wrong time

The Automower works at the wrong time — Mower operating schedule is incorrect

husqvarna · Automower Technical Manual

What does The Automower works at the wrong time mean?

This symptom occurs when the Automower is mowing at times other than programmed. This could be due to an incorrectly set internal clock or incorrect start/stop time settings.

Common Causes

  • The clock on the Automower needs to be set.
  • Start and stop times for mowing are incorrect.
  • The battery in the control box may need to be replaced.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Set the clock on the Automower to the correct time.

  2. 2

    Adjust the start and stop time settings for mowing as required.

  3. 3

    If time settings repeatedly reset, the battery in the control box may need to be replaced (see page 96).

  4. 4

    Verify any schedule overrides or temporary settings in the app.

  5. 5

    Ensure no external timers or conflicting schedules are active.

Browse all codes in this manual (37)
Verified technical data. Last updated: April 2026

Related Faults

Automower runs at an angle or in an arcAutomower runs at an angle or in an arc — Tilt sensor calibration or defectBlade motor defectBlade motor defect or Blade disc blocked — Blades cannot rotate freelyBoth the mowing and charging times are shorter than usualBoth the mowing and charging times are shorter than usual — High temperatures or low battery capacity
Source: Husqvarna Automower Technical Manual
Open Manual (Page 109)Search more codes in this manual