No loop signal — Boundary wire not detected

What does No loop signal mean?

This fault indicates that the Automower cannot detect the boundary wire signal. This wire is essential for the mower to know the limits of the working area.

• Boundary wire is broken or damaged.
• The boundary wire loop is not properly connected to the charging station.
• The charging station is not powered or is faulty.

Click steps to track your progress.

1. 1

   Check that the charging station is plugged in and powered on.

2. 2

   Verify the boundary wire connections at the charging station are secure.

3. 3

   Inspect the boundary wire for visible breaks or damage along its entire length.

4. 4

   Use a multimeter to check for continuity in the boundary wire if possible.