Error A 6 and ON/OFF light flashes — Tap shut-off alarm / No water intake

What does A 6 mean?

The ON/OFF indicator light flashes, and the display shows "A 6". This alarm indicates that the Dishwasher is not receiving water, possibly because the water tap is turned off, the water supply is interrupted, or the appliance's lock was activated after beeps.

• No water supply from the mains.
• The water inlet hose is bent or kinked.
• The water tap connected to the Dishwasher is turned off.
• The appliance lock was activated because no action was taken after warning beeps.

Click steps to track your progress.

1. 1

   Check if the water tap supplying the Dishwasher is fully turned on.

2. 2

   Ensure there is a water supply from the mains in your home.

3. 3

   Inspect the water inlet hose for any bends, kinks, or obstructions.

4. 4

   Switch off the appliance using the ON/OFF button, then turn on the tap. Switch the appliance back on after 20 seconds.

5. 5

   Reprogram the appliance and restart the wash cycle.