CodeRegistry
Brands
  1. Home
  2. Fujitsu
  3. Air to Water Heat Pumps
  4. 67
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

67

Error 67 (6 Green, 7 Red Flashes) — Outdoor unit power short interruption error (protective operation)

Fujitsu · Air to Water Heat Pumps

What does 67 mean?

The hydraulic unit's green LED flashes six times and the red LED flashes seven times. This signifies that the outdoor unit experienced a brief power interruption, causing it to enter a protective shutdown.

Common Causes

  • Momentary power outage or 'brownout' in your home's electrical supply.
  • Loose wiring connections causing intermittent power.
  • A sensitive protective circuit tripping due to minor power fluctuations.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    No immediate action may be needed if power supply has stabilized; the unit may attempt to restart automatically.

  2. 2

    If the unit does not restart, power cycle the heat pump system by turning off the main breaker for 60 seconds, then restoring power.

  3. 3

    Check the power wiring connections to the outdoor unit for any signs of looseness or corrosion.

  4. 4

    Monitor your home's power supply for any further brief interruptions or voltage dips.

  5. 5

    If this error occurs frequently without an obvious power grid issue, consult a qualified electrician to inspect your home's wiring and the unit's power input.

Browse all codes in this manual (59)
Verified technical data. Last updated: April 2026

Related Faults

1 Flash (Outdoor Unit)Outdoor Unit LED 1 Flash — Serial forward transfer error10Fault 10 — Outdoor sensor error11Error 11 (1 Green, 1 Red Flash) — Communication error between Hydraulic and Outdoor unit
Source: Fujitsu Air to Water Heat Pumps
Open Manual (Page 6)Search more codes in this manual