Display shows 'Outside working area! Press START to reset' — Landroid cannot find boundary wire signal

¿Qué significa Outside working area! Press START to reset ?

This message appears if the Landroid is outside its designated mowing area or cannot detect the boundary wire signal. The LED on the charging base may be red.

• The Landroid is actually positioned outside its working area.
• The boundary wire signal is interrupted or not detected.
• The boundary wire ends are connected incorrectly to the charging base.

Haga clic en los pasos para seguir su progreso.

1. 1

   If the Landroid is outside its working area, move it back inside and press START.

2. 2

   If the Landroid is inside its working area, check the charging base LED: if red, ensure the boundary wire is correctly connected and the base has power.

3. 3

   If connections are good, try reversing the boundary wire ends at the charging base.