CodeRegistry
Marcas
  1. Inicio
  2. Wilo
  3. VeroLine and VeroTwin Pumps
  4. Pump runs at reduced output
About·Privacy·Terms

CodeRegistry — Tu biblioteca global de soluciones técnicas.

Por su seguridad, siga siempre los manuales oficiales del fabricante. CodeRegistry es un sitio independiente y no está afiliado a las marcas citadas.

Pump runs at reduced output

Pump runs at reduced output — Possible valve restriction or air in system

Wilo · VeroLine and VeroTwin Pumps

¿Qué significa Pump runs at reduced output ?

The pump is operating but not delivering its full capacity, which could be due to a partially closed valve or air trapped in the system.

Causas comunes

  • Stop valve on the pressure side is throttled (partially closed).
  • Air in the suction line.
  • Clogged filter on the suction side.

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

  1. 1

    Slowly open the stop valve on the pressure side.

  2. 2

    Check the suction line for leaks and vent the pump.

  3. 3

    Clean or replace the filter on the suction side if it is dirty.

  4. 4

    If leaks are visible at flanges, repair them.

Ver todos los códigos en este manual (45)
Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

3 red flashes3 red flashes — Communication error6.0.0.0 flashes6.0.0.0 flashes — Ready to acknowledge error6.0.0.0 steady6.0.0.0 steady — Error acknowledgement countdown active
Fuente: Wilo VeroLine and VeroTwin Pumps
Open Manual (Page 50)Buscar más códigos en este manual