Soak/Wash LED solid ON - No Fill Fault

¿Qué significa SOAK/WASH LED ON ?

The Soak/Wash LED being continuously lit indicates a 'No Fill Fault'. This means the machine is not detecting water entering the drum as expected.

• Water supply issue
• Inlet valve problem
• Water level sensor issue

Haga clic en los pasos para seguir su progreso.

1. 1

   Check that the water supply valves are fully open.

2. 2

   Ensure the inlet hoses are not kinked or blocked.

3. 3

   Verify the water pressure is adequate.

4. 4

   If the problem continues, professional repair may be needed.