Diverter Can't Find Position — Sensor/motor connection or mechanical issue

¿Qué significa Diverter Can't Find Position ?

The diverter system is unable to reach its correct position. This could be due to a faulty sensor, a loose connection, or mechanical binding.

• Corroded or loose connection in diverter sensor/motor circuit
• Open or shorted diverter sensor/motor
• Mechanical binding of the diverter shaft/disc
• Control board diverter motor drive circuit issue

Haga clic en los pasos para seguir su progreso.

1. 1

   Check the diverter operation during the Service Diagnostics Cycle.

2. 2

   Unplug dishwasher or disconnect power.

3. 3

   Check connections in the diverter sensor and motor circuit with a meter. Fix or replace faulty connections/parts.

4. 4

   Inspect the diverter sensor for signs of water or contaminants; replace if found.

5. 5

   If the motor vibrates/hums but shows limited rotation, replace the diverter and seal. If control board circuits are suspected, replace the control board.