¿Qué provoca el error Red LED solid de Tesla Wall Connector?

Repeated residual current faults.. Persistent ground fault.

¿Cómo se corrige el código de falla Red LED solid de Tesla Wall Connector?

1. Turn off the Wall Connector using the upstream circuit breaker. 2. Wait 15 minutes for potential internal reset. 3. Turn the circuit breaker back on. 4. If the red light remains, contact Tesla support.

Red LED solid

Red LED solid — Automatic recovery failed

Tesla Wall Connector · (Gen 3)

¿Qué significa Red LED solid ?

This status appears after the Wall Connector has tried to automatically recover from a residual current fault four times without success. Power is removed, and no further charging attempts are made.

Causas comunes

Repeated residual current faults.
Persistent ground fault.

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Turn off the Wall Connector using the upstream circuit breaker.
2
Wait 15 minutes for potential internal reset.
3
Turn the circuit breaker back on.
4
If the red light remains, contact Tesla support.

Ver todos los códigos en este manual (49)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

1 red blinkOne red blink — Ground fault detected, charging disabled 2 red blinksTwo red blinks — Ground assurance fault, high ground resistance detected 3 red blinksThree red blinks — High temperature detected, charging limited or disabled

Fuente: Tesla Wall Connector (Gen 3)

Open Manual (Page 8)Buscar más códigos en este manual