¿Qué provoca el error Engine runs but mower will not drive de Stihl?

Transmissions are not engaged. Belt is broken. Drive belt slips. Brake is not fully released

¿Cómo se corrige el código de falla Engine runs but mower will not drive de Stihl?

1. Ensure the transmissions are properly engaged. 2. Check if the drive belt is broken and replace it if necessary. Refer to 'Transmission Drive Belt Replacement'. 3. Check if the drive belt is slipping and address the cause (e.g., grease, tension, wear). 4. Verify that the brake is fully released. If not, consult an authorized STIHL servicing dealer.

Stihl Engine runs but mower will not drive Engine runs but…

Engine runs but mower will not drive

Stihl · RZ Zero-Turn Mowers

¿Qué significa Engine runs but mower will not drive ?

The engine starts and runs, but the mower does not move when the controls are engaged. This could be related to transmission engagement, belts, or brakes.

Causas comunes

Transmissions are not engaged
Belt is broken
Drive belt slips
Brake is not fully released

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Ensure the transmissions are properly engaged.
2
Check if the drive belt is broken and replace it if necessary. Refer to 'Transmission Drive Belt Replacement'.
3
Check if the drive belt is slipping and address the cause (e.g., grease, tension, wear).
4
Verify that the brake is fully released. If not, consult an authorized STIHL servicing dealer.

Ver todos los códigos en este manual (9)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

Brake will not holdBrake will not hold Engine exhaust is blackEngine exhaust is black Engine knocksEngine knocks

Fuente: Stihl RZ Zero-Turn Mowers

Open Manual (Page 50)Buscar más códigos en este manual