¿Cómo se corrige el código de falla Wrench icon de Segway?

1. Follow instructions for recommended action in Table 17 (not fully provided). 2. The rider has approximately 10 seconds to stop and step off. 3. After 10 seconds, the PT will shut down when wheels reach zero speed. 4. Contact an Authorized Segway Dealer or Distributor if the fault persists.

Wrench icon

Wrench icon on InfoKey display — System fault detected

Segway · i2 SE and x2 SE

¿Qué significa Wrench icon ?

The system has detected an error in its redundant subsystems and is performing a Safety Shutdown. The Segway PT will reduce speed and emit an audio alert.

Causas comunes

Internal system fault detected

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Follow instructions for recommended action in Table 17 (not fully provided).
2
The rider has approximately 10 seconds to stop and step off.
3
After 10 seconds, the PT will shut down when wheels reach zero speed.
4
Contact an Authorized Segway Dealer or Distributor if the fault persists.

Ver todos los códigos en este manual (25)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

Any of the four outer Balance Indicator lights are redOuter Balance Indicator Lights Red - Imbalance detected Balance Indicator lights flashBalance Indicator Lights Flash - System fault or low battery Battery Charge Indicator lights offBattery Charge Indicator lights off — No AC power or cord issue

Fuente: Segway i2 SE and x2 SE

Open Manual (Page 132)Buscar más códigos en este manual