¿Cómo se corrige el código de falla Two red Battery Charge Indicator lights de Segway?

1. Unplug the power cord. 2. Remove and reseat the Batteries. 3. Check that AC power is present and the Power Cord is fully seated in the Charge Port. 4. If the problem persists, contact an Authorized Segway Dealer or Distributor.

Two red Battery Charge Indicator lights

Two red Battery Charge Indicator lights — Charging failure detected

Segway · i2 SE and x2 SE

¿Qué significa Two red Battery Charge Indicator lights ?

A failure has been detected during charging. All charging has stopped. One or both Battery Charge Indicator lights may be solid red or off.

Causas comunes

Battery charging failure

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Unplug the power cord.
2
Remove and reseat the Batteries.
3
Check that AC power is present and the Power Cord is fully seated in the Charge Port.
4
If the problem persists, contact an Authorized Segway Dealer or Distributor.

Ver todos los códigos en este manual (25)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

Any of the four outer Balance Indicator lights are redOuter Balance Indicator Lights Red - Imbalance detected Balance Indicator lights flashBalance Indicator Lights Flash - System fault or low battery Battery Charge Indicator lights offBattery Charge Indicator lights off — No AC power or cord issue

Fuente: Segway i2 SE and x2 SE

Open Manual (Page 91)Buscar más códigos en este manual