¿Qué provoca el error Icon for Startup Errors (Rider Detect sensor on) de Segway?

Rider Detect sensor is active when powering on. Foot is on the Mat at startup. Mat is obstructed by foreign objects. Mat is sticking to the Powerbase

¿Cómo se corrige el código de falla Icon for Startup Errors (Rider Detect sensor on) de Segway?

1. Ensure your foot is not on the Mat. 2. Check that the Mat is free of foreign objects and not sticking to the Powerbase. 3. Remove, inspect, and reinstall the Mats.

Icon for Startup Errors (Rider Detect sensor on)

Startup Error icon (Rider Detect sensor on) on InfoKey display — Sensor active at startup

Segway · i2 SE and x2 SE

¿Qué significa Icon for Startup Errors (Rider Detect sensor on) ?

A Rider Detect sensor is on at startup, preventing the PT from powering on correctly. Ensure the Mat is clear and sensors are functioning.

Causas comunes

Rider Detect sensor is active when powering on
Foot is on the Mat at startup
Mat is obstructed by foreign objects
Mat is sticking to the Powerbase

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Ensure your foot is not on the Mat.
2
Check that the Mat is free of foreign objects and not sticking to the Powerbase.
3
Remove, inspect, and reinstall the Mats.

Ver todos los códigos en este manual (25)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

Any of the four outer Balance Indicator lights are redOuter Balance Indicator Lights Red - Imbalance detected Balance Indicator lights flashBalance Indicator Lights Flash - System fault or low battery Battery Charge Indicator lights offBattery Charge Indicator lights off — No AC power or cord issue

Fuente: Segway i2 SE and x2 SE

Open Manual (Page 129)Buscar más códigos en este manual