¿Qué provoca el error LED White - Flashing de Schneider Electric?

System initialization after power on. Automatic software update in progress. Internal system check

¿Cómo se corrige el código de falla LED White - Flashing de Schneider Electric?

1. Wait for the startup or update process to complete. This may take a few minutes. 2. Do not interrupt power to the charging station during this phase. 3. Once the LED changes to a stable color (e.g., green, yellow, blue), the station should be operational. 4. If the LED continues to flash for an extended period, consult the user manual or contact support.

LED White - Flashing

Flashing White LED — Starting up or software update

Schneider Electric · Pro DC60

¿Qué significa LED White - Flashing ?

A flashing white LED typically means the charging station is starting up, performing a self-test, or undergoing a software update. This is a temporary state.

Causas comunes

System initialization after power on
Automatic software update in progress
Internal system check

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Wait for the startup or update process to complete. This may take a few minutes.
2
Do not interrupt power to the charging station during this phase.
3
Once the LED changes to a stable color (e.g., green, yellow, blue), the station should be operational.
4
If the LED continues to flash for an extended period, consult the user manual or contact support.

Ver todos los códigos en este manual (8)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

Audible - Abnormal noiseAbnormal noise from inside the charger — Potential internal issue HMI Screen - Error MessageError message on HMI screen — Specific fault identified LED Blue - SolidSolid Blue LED — Standby, awaiting authentication

Fuente: Pro DC60

Open Manual (Page 6)Buscar más códigos en este manual