CodeRegistry
Marcas
  1. Inicio
  2. Samsung
  3. Intesis Home Automation
  4. 151
About·Privacy·Terms

CodeRegistry — Tu biblioteca global de soluciones técnicas.

Por su seguridad, siga siempre los manuales oficiales del fabricante. CodeRegistry es un sitio independiente y no está afiliado a las marcas citadas.

151

Error 151 — Opened EEV of indoor unit (2nd detection)

Samsung · Intesis Home Automation

¿Qué significa 151 ?

The Electronic Expansion Valve (EEV) in the indoor unit is detected as being open when it should be closed or regulating. This is a confirmed issue, preventing proper refrigerant control.

Causas comunes

  • Malfunctioning EEV valve
  • Control board issue affecting EEV operation
  • Refrigerant pressure imbalance
  • Faulty EEV motor or sensor

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

  1. 1

    Power off the entire HVAC system at the main circuit breaker.

  2. 2

    Wait for a few minutes (at least 5-10 minutes) for the system to fully reset.

  3. 3

    Restore power and observe if the error clears and the system operates normally.

  4. 4

    If the error persists, there may be a mechanical or electrical fault with the EEV or its control.

  5. 5

    This issue typically requires diagnosis and repair by a certified HVAC technician.

Ver todos los códigos en este manual (60)
Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

101Error 101 — Indoor unit communication error102Error 102 — Communication error between indoor and outdoor unit108Error 108 — Repeated address setting
Fuente: Intesis Home Automation
Open Manual (Page 22)Buscar más códigos en este manual