Error 2 — IPM over current or hardware failure

¿Qué significa 2 ?

The Inverter Power Module (IPM) has detected excessive current or has failed. This can happen due to overcharging, a dirty outdoor coil, or restrictions in the refrigeration circuit.

• IPM is bad
• Loose compressor wire
• Compressor is bad
• Overcharge of refrigerant
• Dirty outdoor coil
• Refrigeration circuit restriction

Haga clic en los pasos para seguir su progreso.

1. 1

   Check for loose compressor wires and ensure they are firmly connected.

2. 2

   Verify the refrigerant charge level.

3. 3

   Clean the outdoor coil.

4. 4

   If the problem continues, the IPM or compressor may need replacement.