Water remains in the tub or will not drain — Cycle incomplete or drain obstruction

¿Qué significa Water remains in tub/Will not drain ?

Water standing in the dishwasher tub or not draining can be due to an incomplete cycle, an obstruction in the drain system, or an electrical issue.

• Wash cycle not completed.
• Knockout plug not removed from food waste disposer inlet (if connected to a disposer).
• Kinks in the drain hose.
• Food obstructions in the drain or food waste disposer.
• Tripped house fuse or circuit breaker.

Haga clic en los pasos para seguir su progreso.

1. 1

   Verify the cycle has completed (the Clean light should be on). If not, close the door and press START/RESUME to resume, or press CANCEL/DRAIN to end the current cycle.

2. 2

   If the dishwasher is connected to a food waste disposer, ensure the knockout plug has been removed from the disposer inlet.

3. 3

   Check the drain hose for any kinks and straighten them.

4. 4

   Inspect the drain or food waste disposer for food obstructions.

5. 5

   Check your house fuse or circuit breaker for the dishwasher and reset if tripped.